Back to all threads

Connection problems during code generation or verification?

Post reply

joslangen 
(29 posts)

14 Aug 2013, 10:20

In case you get the message "One or more server connections are interrupted" during verification or code generation, it may be that the connection timeout settings should be increased. This error may occur when you're processing large models that take considerable time to upload / download. 

To prevent this error, click "More >>" in the login dialog. In the Advanced section, increase the Network timeout setting (default it is set to 20 seconds, the maximum value is 300 seconds), and click "Log in".

You can find more detailed information on these advanced settings in the Advanced Connection Settings section in the User Manual.

Reply

joslangen 
(29 posts)

20 Aug 2013, 16:50

In case you're verifying a very large or complex model, for which the verification takes more than an hour, you could also get a server connection interruption message. In that case you can increase the "Api time-out" setting. By default this value is set to one hour (3600 seconds), but if your model verification takes longer than that, you can increase this setting such that it encompasses the total verification time necessary. 

Reply

Post reply